Tutorial for N2 Elite Amiiqo NFC Emulator

First of all to present the N2 Elite Amiiqo NFC Emulator: a NFC kit which support all Amiibo data read and write. Differernt with NFC white card, N2 Elite support repeated replacement of Amiibo data, support PC management, support Android mobile phone( with NFC function) management,  one button to switch data.
Before using the N2 Elite amiiqo, what you need:
Android smartphone with NFC function.
N2 Elite APP( Download from offciail website of N2 Elite)
N2 Elite Amiiqo disk.

1 Install and open the App you just downloaded, you will see the begin surface of the software, at meanwhile, put the N2 Elite close to the smartphone NFC chip read zone.

2 After data read, there will have many selection in the APP interface.

  -SET BANKCOUNT:to settle the quantity of the Amiibo
This function is to settle the quantily of Amiibo, maximum to 200. My advise is only settle the quantity you have downloaded, for example, you have downloaded 6 amiibo, then  only settle 6, will be easier to switch and more convinient.

  -MANAGE BANKS: management of amiibo
Normally all the operation we need are here. Briefly, download the amiibo file from internet, send to your smartphone, and with the MANAGE BANKS selection to add or replace Amiibo, write into the N2 card is OK.(after settle, paste the N2 card to your NFC zone)
To manage the data in the current N2 Elite, you can press and hold the corresponding picture to evoke the setup menu.

Set As Active = Set the current Amiibo to the first read position;

Backup = back up the current Amiibo to the phone;

Choose Amiibo = replace Amiibo data;

Delete = delete Amiibo data;

Information = information about current Amiibo data;

  -LOCK: lock N2 Elite
After locking, it cannot be set in the APP application and the base of the PC, unless UNLOCK on the mobile terminal.

  -SHOW ID= ID information
To get the ID information of the current N2 Elite card, generally, one person has only one piece, so this function is not very offten to use.

  SETTINGS=Software settlement
Restore Folder = Select the restored folder location

Backup/Dump Folder = Select the folder location for backup/export

Wi-Fi Update Only = Upgrade the software only under the WIFI network (check to choose or not)

Use Fast-Write = Use fast read and write (check to choose or not)

With PC computer:
1 N2 Elite NFC reader
2 N2 Elite
3 Download and install the driverof the N2 NFC device( choose 64/32 according to your system)
4 Also download and install the N2 special program( go directly to the official download driver application)

First connect the base to the USB port of computer, and place the N2 elite on the base.

Then open the N2 Elite software. If the driver is corrtely installed, the COM3 will recognize automatically, just select Connect directly.

After connection is succeed, the data within the N2 Elite will be read, if your card is locked in your smartphone, can not be edited, you will need to unlock in your smartphone first.

Disconnect = disconnect the computer from the NFC base

Scan For Amiibo = Browse current Amiibo

Dump = Export Amiibo

Set Bank Count = Set the number of Amiibo

After setting the quantity, we can edit the existing Amiibo or add it directly on Enpty (the icon of the question mark).

Right click: Right click on the icon to evoke the edit menu. Detailed instructions are described below;

Double-click: Double-click on the icon and select the Amiibo file to directly replace the current or add Amiibo;

Right click on the icon and the following setting options will appear, translated as follows:

Active = Set the current Amiibo to be the first data read on the N2 card;

Backup = backup current Amiibo data;

Restore = replace the current Amiibo data;

Empty = set the position to null;

According to the above options, you can do it. Remembers to download the Amiibo file in your computer. The N2 Elite is always placed on the base.

Above, the tutorial for N2 Elite.